Payment & Shipping Terms:
|Product Name:||Electric Power Poles||Material:||Steel|
|Min Yield Stress:||345 Mpa||Tensile Strength:||470 ~ 630 Mpa|
|Surface Trement:||Hot Dip Galvanized.||Galvanized:||ASTM A 123|
|Shape:||Polygonal / Round||Zinc Coating:||≥ 86 Microns|
power transmission poles,
composite utility poles
Hot Dip Galvanized Steel Power Poles & Steel Antenna Towers with Steel A345 Q460
|Type||Straight Pole ,Tensile Pole ,Turn Pole , Angle Pole , Straight Pole|
|Applicant||Electrical Transmission Line and Distribution|
|Shape||Round / polygonal / conical|
Applied to the material of general-purpose steel GB/T1591-2008, Q235, Q345 used in China.
|Tolerance of dimension||+- 2%|
10~500KV (10KV, 13.8KV,33KV, 35KV, 66KV, 110KV,132KV, 220KV, 230KV, 330KV, 500KV or Others )
|Max Ice Thick||10mm|
|Design Load in Kg||1280 Kg applied to 60cm from the top pole|
|Surface treatment||Hot dip galvanized in accordance with ASTM A 123. Min Zinc Coating 86 Microns.|
|Joint of Poles||Insert mode,innerflange mode,face to face joint mode .|
|Design of pole||Against earthquake of 8 grade|
|Wind Speed||160 Km/Hour . 30 m /s|
|Minimum yield strength||355 mpa|
|Minimum ultimate tensile strength||470 mpa|
|Max ultimate tensile strength||630 mpa|
|Standard||ISO 9001 : 2008|
|Length of per section||Within 14m once forming without slip joint|
Welding complies with AWS D1.1 standard.
|Thickness||2.5 mm to 30 mm|
Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on.
1) Higher quality lower cost to win the competitive price
2) 3 production lines to ensure fast delivery
3) Skilled manufacturer, quality control and technical team
4) Warranty of quality : more than 20 years
- Top Cap
- Base plate
- Bottom strip
- Standard hole
- Climbing rung
- Anchor bolt
- Bituminous protection
- Painted marking
- Removable ladder
- Grounding Nuts & Bolts
We controlled the quality according to ISO9001:2008, every production processes has a squad leader to doubled check the quality. Our aim is to delivery the zero-defect products to our clients, and we solve all the quality problems in our factory before shipment.
1. All of our material are purchased from famous mill factory to assure the quality.
2. A mill certificate issued by the mill factory with stamp and signature must be provided before
unload the material in our factory;
3. Before put into production, all the material must pass the chemical and physical analysis to
make sure that they have met the requested strength and component.
Terms and Conditions
1. Price Term: EXW, FOB, CFR or CIF.
Ø EXW: Poles Cost
Ø FOB : Pole Cost + Land Transportation + Fee on Port
Ø CFR : Pole Cost + Land Transportation + Fee on Port + Sea Freight
Ø C I F : Pole Cost + Land Transportation + Fee on Port + Sea Freight + Insurance.
2. MOQ: One 40FT Container.
3. Payment Term: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.
4. Delivery Time: 15 working days per container after PI / drawing / prepayment confirmed.
5. Package: Normally wrapped by plastic bags or burlap cloth at the top and bottom,or according to clients’ requirement.
Through the efforts of the company staff, the support and cooperation from all over the world. The company's products have been exported to Philippines, Malaysia, Australia, America, Africa, Latin America, Panama, Suriname, Costa Rica, Colombia, Jordan, Nigeria, etc. We have good export experience and with 1 container export to World in average every day.
Contact Person: Lisa Li