Payment & Shipping Terms:
|Surface Trement:||Hot Dip Galvanized.||Shape:||Polygonal / Round|
|Tolerance:||±2%||Min Yield Stress:||345Mpa|
|Height:||As Design||Thick:||3.0mm ~20mm|
polygonal power transmission poles,
hot dip galvanized power transmission poles,
polygonal transmission line pole
110KV Double Circuits Hot Dip Galvanized ElectricTransmission Steel Pole
|Steel||Yield Strength(MPa)||standard||Standard Title||Metallic element||Content|
|main ingredient Q345||345 for Thickness<=16|
|High strength low alloy structural steels||C||≤0.20|
|Carbon structural steels|
Pole shafts&multi-sided tubular
|AWS D1.1/D1.1M:2010||Structural Welding Code-Steel|
|Welding wire||AWS D1.1/D1.1M:2010||Structural Welding Code-Steel|
|Hot dip galvanizing||Standard||Steel thickness/mm||Mean coating thickness/μm||Metallic element||Content|
|Pole shafts, cross arms&bolted on accessories||ASTM A123/A123M-15 AS/NZS 4680||>6||85||Mn||0.25%-0.40%|
|Foundation Bolts||ASTM A153/A153M-09||_____||≥ 54||S||<0.03%|
Our company mainly products various steel poles including street lighting pole, electric power pole, traffic signal pole, flag pole, wind power pole and microwave communication tower, etc. Also, we can offer OEM service, and product the steel tower according to the customer's design and requirement.
1. What is the MOQ order for your Pole?
For the distribution of steel poles, MOQ is one container. For the transmission, pole is 1 pcs.
2. Can I use LCL container Loading?
Sure. We can load on LCL.
3. Can you supply sample poles?
Of course, we can delivery the sample poles for customers to test.
4. Can I get a lower price if I make the large order?
Of course! Cheaper prices with a large order.
5. What is the payment term?
30% as deposit in advance and 70% before delivery. Or LC at sight. Or D/P.
Or we can discuss with others payment term.
- Top Cap
- Base plate
- Bottom strip
- Standard hole
- Climbing rung
- Anchor bolt
- Bituminous protection
- Painted marking
- Removable ladder
- Grounding Nuts & Bolts
1. All of our materials are purchased from famous mill factory to assure the quality.
2. A mill certificate issued by the mill factory with stamp and signature must be provided before
unload the material in our factory;
3. Before putting into production, all the material must pass the chemical and physical analysis to
make sure that they have met the requested strength and component.
Through the efforts of the company staff, the support and cooperation from all over the world. The company's products have been exported to the Philippines, Malaysia, Australia, America, Africa, Latin America, Panama, Suriname, Costa Rica, Colombia, Jordan, Nigeria, etc. We have good export experience and with 1 container export to World per day on average.
1. We can supply the product based on clients' required drawings, but also can supply the design for any kinds of
electric poles for customers to select.
2. Matercial : hot rolled coil from Q235 to Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,ST52-3
3. Deal: Hot dip galvanized Following ASTM A 123 or any other standard by client required.
4. Packing: Plastic bubble, Mat &Straw Bale or following client required
5. Length: within 14meters once forming( single section)
6. Thickness: from 2.5mm to 22mm
7. Shape: polygonal(6-side,8side,12-side,16side) round tapered.
8. Easy install and maintenance.
Contact Person: Lisa Li